House Fly
Fence Panel Cost and Types in 2026
Fencing

Fence Panel Cost and Types in 2026

Sep 23, 2024 5 min read

A fence panel typically costs $40 to $350 in 2026, depending on material. A 6 by 8 foot pressure treated wood panel runs $60 to $120, vinyl $120 to $250 and composite $200 to $350. Installed with posts and labor, most homeowners pay $20 to $80 per linear foot.

Panel material Price per panel (materials) Installed per linear foot Typical lifespan
Pressure treated pine $60 to $120 $25 to $45 10 to 15 years
Cedar $90 to $180 $30 to $55 15 to 20 years
Vinyl (PVC) $120 to $250 $35 to $60 20 to 30 years
Aluminum $100 to $300 $35 to $70 20 years or more
Composite $200 to $350 $45 to $80 25 to 30 years
Chain link (per 10 ft section) $40 to $90 $15 to $30 15 to 20 years

Prices above are typical 2026 ranges from home centers and fence suppliers for standard 6 foot privacy or 4 foot picket panels. Custom heights, premium wood grades and decorative tops cost more, and regional lumber prices can shift wood panel costs by 10% to 20% in either direction.

What are the main types of fence panels?

Panels are prebuilt sections, usually 6 or 8 feet wide, that attach between posts. They install faster than building a fence board by board, which keeps labor down. Here is how the common materials stack up.

Wood panels

Pressure treated pine is the budget choice and the most common privacy panel in the US. Cedar costs more but resists rot and insects naturally and weathers to a soft gray. Styles include dog ear, flat top, board on board, shadowbox and lattice top. Wood needs cleaning and a stain or sealer every two to three years.

Vinyl panels

Vinyl panels never need paint, do not rot and wash clean with a hose. Thicker walls and internal aluminum rails resist sagging and wind. The downside is cost and that a cracked panel usually has to be replaced, not patched.

Metal panels

Aluminum panels are rust resistant, light and good for pools and front yards where you want a view. Steel panels are stronger and cost more. Wrought iron style panels add curb appeal but are not a privacy option.

Composite panels

Composite blends wood fiber and plastic. It looks like wood, does not splinter or rot and needs almost no upkeep. It is the most expensive common option up front but can cost less over 25 years than repeatedly staining wood.

Chain link

Chain link comes in rolls or 10 foot sections rather than solid panels. It is the cheapest way to fence a large yard for pets or kids. Privacy slats add $3 to $8 per linear foot.

How much does it cost to install fence panels?

Installation adds posts, concrete, hardware and labor to the panel price. Labor typically runs $10 to $30 per linear foot. Here is what a few common projects cost.

Project Typical total
Replace one damaged wood panel $150 to $350
Replace one vinyl panel $200 to $450
100 ft wood privacy fence, 6 ft $2,500 to $4,500
100 ft vinyl privacy fence, 6 ft $3,500 to $6,000
150 ft aluminum pool fence, 4 ft $5,250 to $10,500
Replace one fence post $100 to $300

What affects the price of fence panels?

  • Height. A 6 foot panel costs roughly 30% to 50% more than a 4 foot panel of the same material.
  • Style. Board on board and shadowbox use more lumber than a basic dog ear panel and cost more.
  • Posts. Wood 4×4 posts are cheapest; steel posts behind a wood fence add $10 to $30 each but resist rot and wind.
  • Gates. A walk gate typically adds $250 to $700 installed.
  • Old fence removal. Tear out and haul away typically adds $3 to $5 per linear foot.
  • Terrain. Slopes need stepped or racked panels, and rocky soil slows post digging.

Before signing, it helps to know what a good quote looks like. Our guide on choosing a fence contractor in Dallas walks through the questions to ask.

Which fence panel material lasts longest?

Composite and vinyl usually last the longest with the least work, often 20 to 30 years. Aluminum lasts as long but gives no privacy. Wood can reach 15 to 20 years if it is kept clean and sealed, which is why cleaning matters; see what it costs to pressure wash a fence.

Climate matters too. In humid Gulf Coast yards, wood panels near sprinklers or flower beds rot first at the bottom, so leave a 2 inch gap above the soil. In places that see hard freezes, check posts for heaving after a cold snap, as our post on saving your yard and fence after a Houston freeze explains. Shaded, damp courtyards also grow mildew fast, a point covered in our New Orleans courtyard garden maintenance guide.

Should you repair or replace fence panels?

If only one or two panels are damaged and the posts are solid, replacing just those panels is the cheapest fix. Once posts lean, rot at ground level or more than a third of the panels are cracked or warped, a full replacement usually costs less over time than repeated repairs. Matching is the other issue: a new wood panel stands out against weathered ones for a year or two, and older vinyl styles can be discontinued.

Situation Usual best move
One or two broken panels, solid posts Replace the panels only
A few leaning posts, panels in good shape Reset or replace those posts
Widespread rot, leaning sections, fence over 15 years old Replace the whole fence

How do you make fence panels last longer?

  • Keep soil, mulch and sprinkler spray off the bottom of wood panels.
  • Clean wood and vinyl once a year to remove mildew and dirt.
  • Stain or seal wood every two to three years, sooner in full sun.
  • Tighten loose screws and gate hinges each spring.
  • Trim vines and shrubs that hold moisture against the fence.

Can you install fence panels yourself?

Yes, panels are the most DIY friendly way to build a fence, and doing it yourself saves the $10 to $30 per linear foot labor cost. The hard parts are digging post holes 24 to 36 inches deep, setting posts plumb in concrete and keeping exact spacing so each panel fits. Call 811 before you dig. For long runs, slopes, vinyl systems or gates, hiring the install usually pays for itself in a straighter, longer lasting fence.

See your upfront price and book your fence installation on House Fly. You see the price before you book, and payment is held until the job is done.

Frequently asked questions

How much does a single fence panel cost?

A single 6 by 8 foot panel typically costs $60 to $120 in pressure treated pine, $90 to $180 in cedar, $120 to $250 in vinyl and $200 to $350 in composite. Replacing one damaged panel, including labor and hardware, usually runs $150 to $450 depending on the material.

What is the cheapest type of fence panel?

Chain link is the cheapest, at $15 to $30 per linear foot installed. For a solid privacy fence, pressure treated pine panels are the most affordable choice at $25 to $45 per linear foot installed. They cost less up front but need staining or sealing every two to three years.

How many fence panels do I need?

Divide the total fence length in feet by the panel width, usually 6 or 8 feet, and round up. A 120 foot run with 8 foot panels needs 15 panels and 16 posts. Subtract the width of any gates, and add a spare panel if your yard has slopes or odd corners.

Are vinyl fence panels worth the extra cost?

Vinyl costs about 30% to 50% more than pressure treated wood up front, but it never needs paint or stain and resists rot and insects. Over 20 years, the savings on upkeep often close most of the gap, making vinyl a good value if you plan to stay in the home.

Ready to Get Started?

Book a trusted local pro in minutes. Upfront pricing, no surprises.

Select your service
Sign Up for Our Newsletter!
Stay up to date with the latest home trends, unsubscribe anytime.
You're subscribed!